Instructions

• Before sticking your label, pick a smooth surface and be sure it is clean and dry.
• Place your label and make sure there are no air bubbles between the label and the surface.
• Stay away from edges, bumps, seams, or pronounced curves.
• Keep your labels dry for at least 24 hours before washing or submerging it in water (Microwave/Dishwasher safe after this period).
• If you wash your labeled items by hand, we recommend to rub over the labels gently.
• Do not use an abrasive cloth or sponge since it might scratch some ink off 
• We recommend the use of liquid detergent for washing your labels (by hand/dishwasher). Avoid Powder Soap since it might scratch some ink off.
• For your Sticky Shoe Labels, be sure you place them in the center of the heel of the shoe and allow 24 hours for the adhesive to stick to the surface.
• We have created these yellow labels for shoes only but they can also be used in toys, books, and items that don't require to much cleaning since the clear coated cover might peel off  if exposed long periods under water. They are still waterproof and very durable with a very strong permanent adhesive.

• Before sticking your Iron-on transfer label onto your clothes pick a smooth, clean, and dry surface. Do not try to iron them over wet or damp material.
• Pop out your label from the sheet and place it on the clothing with the printed area side up.
• Cover the label with a clean piece of cloth before placing the iron on it (a small cloth is included, but you can also use a white paper towel).
• With your preheated iron on the right setting for the garment, press the iron firmly over the cloth & label for about 10 to 20 seconds. Repeat if necessary to ensure all corners and edges of the label are stuck to the garment.
• Try not to move the iron back and forth too much. Just press the iron firmly and let the heat work on the label. It's ok for some ink to get on the sample cloth or paper towel.
• Do not use the same stained area of the sample cloth or paper towel to iron on another label.  Use a clean surface everytime.
• We recommend a dry setting on your iron. Please DO NOT use steam since the water might curl the label and melt the adhesive making it unusable.
• Keep the label dry for at least 24 hours before washing the garment.

• To pop the tags out of the sheet, double bend the perforated edges before separating the tags from the matrix sheet.
• Use your fingers to gently push the tags out being careful not to tear the tag.
• Remove the middle circle to allow the strap to go through. Clean the edges and dispose all left over plastic immediately.
• Take one of the straps and pass it through the middle circle and make a loop by passing the tag through one side of the strap.
• Perform the same operation with the other side of the strap by placing it through the hole you want to hang your tag from.

Just a reminder that No Label will last forever but the ink should stay on after many washes and a few months of continuous use.  All our stickers have a special permanent self adhesive for universal use that stick to most surfaces if use properly.

Please follow these recommendations to make your Labels and Tags last longer!

Click on any image to view larger image.